Start the enviolo App
After the welcome screen on the App disappears you will see a connection request
Power on your drive system.
Push the button on the front side of the hub interface and hold it for 5 seconds.
The button will start blinking blue.
The device should now appear on your screen.
Click on your preferred device to start the pairing process.
After pairing is complete you will see the menu screen.
Close the enviolo app.
Initiate the pairing mode on the hub interface again.
Press and hold the center button for 3 seconds until the LED starts flashing green and red. Once the LED flashes green only, the device is paired.